AEON - Edition 4 - Basic Sky

The new AEON Hookah - Edition 4 is the successor of the Edition 3 and was developed and constantly tested for over a year. The AEON Hookahs are produced in Germany under the highest quality standards from V2A stainless steel (1.4305 V2A stainless steel from Switzerland) near Stuttgart and then each component of the AEON Hookah goes through another strict quality control in our warehouse. The production of the Hookahs in Germany is carried out with ISO 9001 and ISO 14001 certification and each thread is checked on site for accuracy of fit. The bases of the AEON Hookah are mouth-blown in elaborate manual work and then checked for quality in our warehouse and glued with a high-quality 2-component glue. If you buy an AEON Hookah, you can be sure to own an absolutely high-quality product, which has innovative features and was produced with a lot of manual work & assembled by us, because we pack every order from the individual parts ourselves in our warehouse and check the quality again.

Scope of delivery of the Edition 4 - Basic:

- Head adapter with M16x1 thread

- Ashtray (hand-ground from V2A stainless steel)

- 18/8 ground joint on M16x1 adapter

- Smoke column with 29/2 ground joint at the bottom (M14x1 thread inside) and 18/8 ground joint at the top

- Stembase with 4 connections incl. closed chamber and blow-off valve on the smoke column

- 4 x hose end pieces with shortened 18/8 joint incl. 11mm ball

- 4 x sleeves incl. 6mm ball for blowing out

- 4 x Patented APS (AEON Purge System) in the base, consisting of 3 parts each: Ball seat for 11mm ball, spring and adjustable blow-out device.

- Downstem with M14x1 thread

- Diffuser with M14x1 thread

- Base with thread

How does the Edition 4 - Basic differ from other hookahs?

The Edition 4 has the patented AEON Purge System (APS) which allows you to purge the smoke from the bowl without removing any balls from the end of the tube, so that you can get the stale smoke out of the base. The APS works by a spring that is pushed down when you blow into your hose, creating a gap that allows you to vent the smoke out of the base. You can adjust the APS by screwing the blow-out device in or out of the stembase. If you screw it further into the stembase, the spring gets more tension and it is harder to blow out, whereas if you screw it far out, it is easier to blow out. With the Edition 4, we have also developed a new blow-out valve that guides the smoke upwards along the smoke column. This prevents you from blowing smoke upwards along the smoke column instead of out of the other tubes when you blow. This system also works when you attach other smoke columns to the Edition 4. We also offer other smoke columns that are compatible with the Edition 4, so that the position of the blow-off valve can be changed. The entire technology of the APS and the blow-off valve is elegantly hidden in the Base and hardly visible from the outside. The stembase has a 29/2 joint, which means you can customize the Edition 4 according to your wishes. For example, other smoke columns with a 29/2 joint fit easily into the base and you can adapt the appearance of your hookah at any time. The smoke column, which is included with the Edition 4, is first inserted into the 29/2 joint of the base and then screwed to the downstem with M14x1 thread. Since the smoke column has an 18/8 ground joint at the top, you can also attach a molasses trap or other components with an 18/8 ground joint and adjust the height of the Edition 4 according to your wishes. With the stembase adapter, which is available as an accessory, you can also easily attach smoke columns with M16x1 thread to your Edition 4 and thus make your Edition 4 even more individual.

What is the difference between Edition 4 - Basic and Premium?

The Edition 4 - Basic does not have a two-part smoke column, a divisible dip tube or a draught reducer. However, you can easily purchase these components as accessories in our shop if you would like to convert your Edition 4 - Basic into a Premium.

Dimensions of the hookah:

Height: approx. 45 cm

Weight: 4,00 kg

IMPORTANT NOTE: Please note that all our glasses are handmade and may vary from colours and gradients. The images displayed on the website are sample images only. Please also note that due to time constraints, we are unfortunately unable to pick out a bowl of your choice based on your colours. As all bases are handmade, it is possible that there are small air bubbles in the glass. If you are unhappy with your base, please contact us. Please note that we can only exchange your base if it is unused and the shipping costs are paid by you. Please note the cleaning & care instructions, as well as the assembly instructions. You can find the instructions here.